AccessoFacile + Router RUT300

Routing
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing

Network protocols
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)

VoIP passthrough support
H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

Connection monitoring
Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

Firewall
Port forward, traffic rules, custom rules

Firewall status page
View all your Firewall statistics, rules, and rule counters

Ports management
View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on

Network topology
Visual representation of your network, showing which devices are connected to which other devices

Hotspot
Captive portal (Hotspot), internal/external Radius server, SMS authorization, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable themes and option to upload and download customised hotspot themes

DHCP
Static and dynamic IP allocation, DHCP Relay

QoS / Smart Queue Management (SQM)
Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

DDNS
Supported >25 service providers, others can be configured manually

Network backup
VRRP, Wired options, each of which can be used as an automatic Failover

Load balancing
Balance Internet traffic over multiple WAN connections

SSHFS
Possibility to mount remote file system via SSH protocol

Authentication
Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block

Firewall
Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

Attack prevention
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

VLAN
Port and tag-based VLAN separation

WEB filter
Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only

Access control
Flexible access control of SSH, Web interface, CLI and Telnet

OpenVPN
Multiple clients and a server can run simultaneously, 27 encryption methods

OpenVPN Encryption
DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256

IPsec
IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)

GRE
GRE tunnel, GRE tunnel over IPsec support

PPTP, L2TP
Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support

Stunnel
Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code

DMVPN
Method of building scalable IPsec VPNs

SSTP
SSTP client instance support

ZeroTier
ZeroTier VPN client support

WireGuard
WireGuard VPN client and server support

Tinc
Tinc offers encryption, authentication and compression in it’s tunnels. Client and server support.

Supported modes
Client, Server

Supported connection types
TCP

ID range
Respond to one ID in range [1;255] or any

Allow Remote Access
Allow access through WAN

Custom registers
MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality

Supported functions
01, 02, 03, 04, 05, 06, 15, 16

Supported data formats
8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)

Protocol
HTTP(S), MQTT, Azure MQTT, Kinesis

Data to server
Extract parameters from multiple sources and different protocols, and send them all to a single server

MQTT Gateway
Allows sending commands and receiving data from MODBUS Master through MQTT broker

Supported modes
TCP Master, DNP3 Outstation

DLMS Support
DLMS – standard protocol for utility meter data exchange

WEB UI
HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log

FOTA
Firmware update from server, automatic notification

SSH
SSH (v1, v2)

TR-069
OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

MQTT
MQTT Broker, MQTT publisher

SNMP
SNMP (v1, v2, v3), SNMP Trap

JSON-RPC
Management API over HTTP/HTTPS

RMS
Teltonika Remote Management System (RMS)

Cloud of Things
Allows monitoring of: Device data, Mobile data, Network info, Availability

ThingWorx
Allows monitoring of: WAN Type, WAN IP

Cumulocity
Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP

Azure IoT Hub
Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server

CPU
QCA9531, MIPS 24kc, 650 MHz

RAM
64 MB, DDR2

FLASH storage

16 MB, SPI Flash

WEB UI
Update FW from file, check FW on server, configuration profiles, configuration backup

FOTA
Update FW

RMS
Update FW/configuration for multiple devices at once

Keep settings
Update FW without losing current configuration

Operating system
RutOS (OpenWrt based Linux OS)

Supported languages
Busybox shell, Lua, C, C++

Development tools
SDK package with build environment provided

GPL customization
You can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients’ needs.

NTRIP
NTRIP protocol (Networked Transport of RTCM via Internet Protocol)

Data rate
USB 2.0

Applications
Samba share, USB-to-serial

External devices
Possibility to connect external HDD, flash drive, additional modem, printer, USB-serial adapter

Storage formats
FAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4

Input
2 x Configurable digital Inputs. Digital input 0 – 5 V detected as logic low, 8 – 30 V detected as logic high.

Output
2 x Configurable digital Outputs. Open collector output, max output 30 V, 300 mA.

Events
Email, RMS

I/O juggler
Allows to set certain I/O conditions to initiate event

Connector
4-pin industrial DC power socket

Input voltage range
7 – 30 VDC, reverse polarity protection, voltage surge/transient protection

PoE (passive)
Passive PoE over spare pairs. Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 – 30 VDC

Power consumption
Idle: 1.3 W, Max: 3 W

Ethernet
5 x RJ45 ports, 10/100 Mbps

I/O’s
2 x Configurable I/O pins on 4-pin power connector

Status LEDs
5 x ETH status, 1 x Power

Power
1 x 4-pin power connector

USB
1 x USB A port for external devices

Reset
Reboot/User default reset/Factory reset button

Casing material
Aluminium housing

Dimensions (W x H x D)
100 x 30 x 85 mm

Weight
229 g

Mounting options
DIN rail, flat surface placement